Rf Exposure - Digi ConnectCore 8X Hardware Reference Manual

Regulatory information and certifications
Antenna
type Supplier
Dipole Linx
PCB Ethertronic
PCB TAOGLAS
Note If using the RF module in a portable application (for example - if the module is used in a hand-
held device and the antenna is less than 20 cm (8 in) from the human body when the device is in
operation): The integrator is responsible for passing additional SAR (Specific Absorption Rate) testing
based on FCC rules 2.1091 and FCC Guidelines for Human Exposure to Radio Frequency
Electromagnetic Fields, OET Bulletin and Supplement C. The testing results will be submitted to the
FCC for approval prior to selling the integrated unit. The required SAR testing measures emissions
from the module and how they affect the person.

RF exposure

CAUTION! To satisfy FCC RF exposure requirements for mobile transmitting devices, a
separation distance of 20 cm (8 in) or more should be maintained between the antenna of
this device and persons during device operation. To ensure compliance, operations at closer
than this distance are not recommended. The antenna used for this transmitter must not be
co-located in conjunction with any other antenna or transmitter. The preceding statement
must be included as a CAUTION statement in OEM product manuals in order to alert users of
FCC RF Exposure compliance.
ConnectCore® 8X System-on-Module Hardware Reference Manual
Antenna part no. Freq. (MHz)
ANT-DB1-RAF-RPS 2402~2480
5150~5250
5250~5350
5470~5725
5725~5850
1001932 2402~2480
5150~5250
5250~5350
5470~5725
5725~5850
FXP831.07.0100C 2402~2480
5150~5250
5250~5350
5470~5725
5725~5850
United States FCC
Peak antenna Directional
gain (dBi) gain (dBi)
2.5 5.51
4.6 7.61
4.6 7.61
4.6 7.61
4.6 7.61
2.5 5.51
5 8.01
5 8.01
5 8.01
5 8.01
3 6.01
5.5 8.51
5.5 8.51
5.5 8.51
5.5 8.51
110