Table of Contents
Advertisement
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide
config bootp_relay
Purpose
Used to configure the BOOTP relay feature
of the switch.
Syntax
config bootp_relay {hops <value 1-16>}
{time <sec 0-65535>}
Description
This command is used to configure the
BOOTP relay feature.
Parameters
hops <value 1-16> − Specifies the maximum
number of router hops that the BOOTP
packets can cross.
time <sec 0-65535> − The minimum time in
seconds within which the switch must relay
the BOOTP request. If this time is exceeded,
the switch will drop the BOOTP packet.
Restrictions
Only administrator-level users can issue
this command.
Example Usage:
To configure BOOTP relay status:
local>config bootp_relay hops 4 time 2
Command: config bootp_relay hops 4 time 2
Success.
local>
269
Advertisement
Table of Contents
