Table of Contents
Advertisement
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide
Example Usage:
To restart the switch:
local>reboot
Command: reboot
Are you sure want to proceed with the
system reboot? (y|n)
Please wait, the switch is rebooting...
reset
Purpose
Used to reset the switch to the factory
default settings.
Syntax
reset {config|system}
Description
This command is used to restore the
switch's
settings assigned from the factory.
Parameters
config − If config is specified, all of the
factory default settings are restored on the
switch except for the IP address, user
accounts, and the switch history log.
system − If system is specified all of the
factory default settings are restored on the
switch.
If no parameter specified, the switch's
current IP address, user accounts, and
switch history log are retained.
parameters are restored to their factory
default settings.
configuration
to
the
45
default
All other
Advertisement
Table of Contents
