Igmp Commands - D-Link DES-3350SR Command Line Interface Reference Manual

DES-3350SR Layer 3 Fast Ethernet Switch User's Guide
IGMP C
The switch port commands in the Command Line Interface (CLI)
are listed (along with the appropriate parameters) in the
following table.
Command Parameters
config igmp ipif <ipif_name 12>
all
version <value 1-2>
query_interval <sec 1-65535>
max_response_time <sec 0-25>
robustness_variable <value 1-255>
last_member_query_interval <sec 0-25>
state [enabled|disabled]
show igmp ipif <ipif_name 12>
show igmp group group <group>
ipif <ipif_name 12>
Each command is listed, in detail, in the following sections.
20
OMMANDS
209