Table of Contents
Advertisement
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide
show 802.1x auth_state
Port number − Shows the physical port
number on the switch.
Auth PAE State:
Initalize|Disconnected|Connecting|
Authenticating|Authenticated|Held
|ForceAuth|ForceUnauth − Shows the
current state of the Authenticator PAE.
Backend State: Request|Response|Fail|
Idle|Initalize|Success |Timeout − Shows
the current state of the Backend
Authenticator.
Port Status: Authorized|Unauthorized −
Shows the result of the authentication
process. Authorized means that the user
was authenticated, and can access the
network. Unauthorized means that the
user was not authenticated, and cannot
access the network.
Restrictions
Only administrator-level users can issue
this command.
Example Usage:
To display the 802.1x authentication state:
local>show 802.1x auth_state
Command: show 802.1x auth_state
Port
Auth PAE State
------
-----------------------
1
ForceAuth
Backend State
Port Status
---------------------
-----------------
Success
Authorized
237
Advertisement
Table of Contents
