DES-3350SR Layer 3 Fast Ethernet Switch User's Guide
B
ROADCAST
C
ONTROL
The broadcast storm control commands in the Command Line
Interface (CLI) are listed (along with the appropriate parameters)
in the following table.
Command
Parameters
config traffic
<storm_grouplist 1-8>
control
all
broadcast [enabled|disabled]
multicast [enabled|disabled]
dlf [enabled|disabled]
threshold <value 0-255>
show traffic
{group_list <storm_grouplist 1-8>}
control
Each command is listed, in detail, in the following sections.
config traffic control
Purpose
Used
traffic control.
S
TORM
C
OMMANDS
to
configure
broadcast|multicast
123
11