DES-3350SR Layer 3 Fast Ethernet Switch User's Guide
To display an SNMP engine on the switch:
local>show snmp engineID
Command: show snmp engineID
SNMP Engine ID : 1023457890
local>
create snmp group
Purpose
Used to create a new SNMP group, or a
table that maps SNMP users to SNMP
views.
create snmp group <groupname 32>
Syntax
[v1|v2c|v3 [noauth_priv
|auth_nopriv|auth_priv]]{read_view
<view_name 32>|notify_view
<view_name 32>|notify_view
<view_name 32>}
Description
The create snmp group command creates a
new SNMP group.
Parameters
<groupname 32> − An alphanumeric name
of up to 32 characters that will identify the
new SNMP group.
v1 − The least secure of the possible
security models.
v2c − The second least secure of the
possible security models.
v3 − The most secure of the possible
security models.
noauth_nopriv − Specifies neither
support for packet authentication nor
encrypting.
65