Table of Contents
Advertisement
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide
config radius
<udp_port_number>|acct_port
<udp_port_number>}
Description
The config radius command is used to
configure the switch's Radius settings.
Parameters
<server_index 1-3> − Assigns a number to
the current set of Radius server settings.
Up to three groups of Radius server
settings can be entered on the switch.
<server_ip> − The IP address of the Radius
server.
key − Specifies that a password and
encryption key will be used between the
switch and the Radius server.
<passwd 32> − The shared-secret key
used by the Radius server and the
switch. Up to 32 characters can be used.
default − Returns all of the ports in the
range to their default Radius settings.
auth_port <udp_port_number> − The UDP
port number for authentication requests.
The default is 1812.
acct_port <udp_port_number> − The UDP
port number for accounting requests. The
default is 1813.
Restrictions
Only administrator-level users can issue
this command.
Example Usage:
To configure Radius settings:
local>config radius add 1 10.48.74.121 key dlink default
Command: config radius add 1 10.48.74.121 key dlink default
249
Advertisement
Table of Contents
