Table of Contents
Advertisement
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide
Each command is listed, in detail, in the following sections.
config dnsr
Purpose
Used to configure the DNS relay function.
config dnsr [primary|secondary]
Syntax
nameserver <ipaddr>
Description
This command is used to configure the DNS
relay function on the switch.
Parameters
primary − Indicates that the IP address
below is the address of the primary DNS
server.
secondary − Indicates that the IP address
below is the address of the secondary DNS
server.
nameserver <ipaddr> − The IP address of the
DNS nameserver.
Restrictions
Only administrator-level users can issue
this command.
Example Usage:
To set IP address 10.43.21.12 of primary.
local>config dnsr primary nameserver 10.43.21.12
Command: config dnsr primary nameserver 10.43.21.12
Success
276
Advertisement
Table of Contents
