Table of Contents
Advertisement
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide
config pim
Purpose
Used to configure PIM on the switch.
config pim [ipif <ipif_name 12>/all]
Syntax
{hello <sec 1-18724>/jp_interval <sec 1-
18724>/state [enabled/disabled]}
Description
This command is used to configure PIM on
the switch.
<ipif_name 12> − The name of the IP
Parameters
interface for which you want to configure
PIM.
all − Specifies that PIM will be configured
for all IP interfaces on the switch.
hello
seconds, between issuing hello packets to
find neighboring routers.
jp_interval <sec 1-18724> − The join prune
interval is the time to wait before updating
a peer's forwarding state.
state − Allows PIM to be disabled or
enabled for the above IP interface. The
default is disabled.
Restrictions
Only administrator-level users can issue
this command.
Example Usage:
To configure PIM:
−
<sec
1-18724>
The
304
time,
in
Advertisement
Table of Contents
