DES-3350SR Layer 3 Fast Ethernet Switch User's Guide
config arp_aging
Purpose
Used to configure the age-out timer for ARP
table entries on the switch.
Syntax
config arp_aging time <value 0-65535>
Description
This command sets the maximum amount
of time, in seconds, that an ARP entry can
remain in the switch's ARP table, without
being accessed, before it is dropped from
the table.
Parameters
time <value 0-65535> − The ARP age-out
time, in seconds. The default is 20.
Restrictions
Only administrator-level users can issue
this command.
Example Usage:
To configure ARP aging time:
local>config arp_aging time 30
Command: config arp_aging time 30
Success.
local>
config arpentry
Purpose
Used to configure ARP table entries on the
switch.
187