D-Link DES-3350SR Command Line Interface Reference Manual page 356

DES-3350SR Layer 3 Fast Ethernet Switch User's Guide
config sntp
Syntax config sntp
Description This command is used to configure SNTP
on the switch.
Parameters primary − This is the primary server the
SNTP information will be taken from.
<ipaddr> − The IP address of the primary
server.
secondary − This is the secondary server
the SNTP information will be taken from in
the event the primary server is unavailable.
<ipaddr>
secondary server.
poll-interval − This is the time the SNTP
information will be polled.
<int 30-99999> − The polling interval
ranges from 30 to 99,999 seconds.
Restrictions Only administrator-level users can issue
this command.
Example Usage:
To configure SNTP for the primary server for a switch:
−
The IP address
356
for the