Table of Contents
Advertisement
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide
Success.
local>
config vlan add
Purpose
Used to add additional ports to a previously
configured VLAN.
config vlan <vlan_name 32> add
Syntax
[tagged|untagged|forbidden] <portlist>
Description
This command allows you to add ports to
the port list of a previously configured
VLAN. You can specify the additional ports
as tagging, untagging, or forbidden. The
default is to assign the ports as untagging.
Parameters
<vlan_name 32> − The name of the VLAN
you want to add ports to.
tagged − Specifies the additional ports as
tagged.
untagged − Specifies the additional ports as
untagged.
forbidden − Specifies the additional ports
as forbidden.
<portlist> − A range of ports to add to the
VLAN. The port list is specified by listing
the beginning port number and the highest
port number of the range. The beginning
and end of the port list range are separated
by a dash. For example, 3 would specify
port 3. 4 specifies port 4. 3-4 specifies all
155
Advertisement
Table of Contents
