Table of Contents
Advertisement
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide
create access_profile
dst_port_mask
Specifies a UDP port mask for the
destination port.
protocol_id − Specifies that the switch will
examine each frame's Protocol ID field.
user_mask
Specifies that the rule applies to the IP
protocol ID and the mask options behind
the IP header.
permit − Specifies that packets that match
the access profile are permitted to be
forwarded by the switch.
deny − Specifies that packets that do not
match the access profile are not permitted
to be forwarded by the switch and will be
filtered.
profile_id <value 1-255> − Specifies an
index number that will identify the access
profile being created with this command.
Restrictions
Only administrator-level users can issue
this command.
Example Usage:
To create an access profile that will deny service to the
subnet ranging from 10.42.73.0 to 10.42.73.255:
local> create access_profile ip source_ip_mask 255.255.255.0
deny profile_id 1
Command: create access_profile ip source_ip_mask
255.255.255.0 deny profile_id 1
<hex
0x0-0xffff>
<hex
0x0-0xffffffff>
259
−
−
Advertisement
Table of Contents
