Table of Contents
Advertisement
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide
config 802.1p user_priority
Description
This command allows you to configure the
way the switch will map an incoming
packet, based on its 802.1p user priority, to
one of the four available hardware priority
queues on the switch.
The switch's default is to map the following
incoming 802.1p user priority values to the
four hardware priority queues:
802.1p
0
1
2
3
4
5
6
7
This
recommendations
802.1D.
You can change this mapping by specifying
the 802.1p user priority you want to go to
the <class_id 0-3> (the number of the
hardware queue).
Hardware Queue
1
0
0
1
2
2
3
3
mapping
scheme
is
contained
133
Remark
Mid-low
Lowest
Lowest
Mid-low
Mid-high
Mid-high
Highest
Highest.
based
upon
in
IEEE
Advertisement
Table of Contents
