D-Link DES-3350SR Command Line Interface Reference Manual page 357

DES-3350SR Layer 3 Fast Ethernet Switch User's Guide
local>config sntp primary 10.24.22.5
Command: config sntp primary 10.24.22.5
Success.
local>
enable sntp
Purpose Used to enable SNTP on the switch.
Syntax enable sntp
Description This command enables SNTP on a switch.
Parameters none.
Restrictions Only administrator-level users can issue
this command.
Example Usage:
To enable SNTP on the switch:
local>enable sntp
Command: enable sntp
Success.
local>
357