Table of Contents
Advertisement
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide
SNTP C
The Simple Network Time Protocol (SNTP) (an adaptation of the
Network Time Protocol (NPT)) commands in the Command Line
Interface (CLI) are listed (along with the appropriate parameters)
in the following table.
Command
Parameters
config sntp
primary <ipaddr>
secondary <ipaddr>
poll-interval <int 30-99999>
enable sntp
disable sntp
show sntp
Each command is listed, in detail, in the following sections.
config sntp
Purpose
Used to configure SNTP on the switch.
32
OMMANDS
355
Advertisement
Table of Contents
