Table of Contents
Advertisement
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide
config route redistribute dst rip
the
individual routers current routing protocol.
The
information between the OSPF and RIP
routing protocols to all routers on the
network that are running OSPF or RIP.
Routing information entered into the Static
Routing Table on the local switch is also
redistributed.
Parameters
src − Allows the selection of the routing
protocol on the source device.
dst − Allows the selection of the routing
protocol on the destination device.
<value> − Allows the entry of an OSPF
interface cost. This is analogous to a Hop
Count in the RIP routing protocol.
Restrictions
Only administrator-level users can issue
this command.
Routing information source − OSPF and the Static Route table.
Routing information will be redistributed to RIP. The following
table lists the allowed values for the routing metrics and the
types (or forms) of the routing information that will be
redistributed.
Route Source
Metric
various
routers
according
switch
can
redistribute
Type
206
to
the
routing
Advertisement
Table of Contents
