Table of Contents
Advertisement
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide
Priority
STP Version
TX Hold Count
Forwarding BPDU : Enabled
local>
show stp ports
Purpose
Used to display the switch's current per-
port group STP configuration.
show stp ports <portlist>
Syntax
Description
This
current per-port group STP configuration.
<portlist> − Specifies a range of ports to be
Parameters
configured. The port list is specified by
listing the beginning port number and the
highest port number of the range. The
beginning and end of the port list range are
separated by a dash. For example, 3 would
specify port 3. 4 specifies port 4. 3-4
specifies all of the ports between port 3 and
port 4 − in numerical order.
Restrictions
None
Example Usage:
To display STP state of port 1-9:
local>show stp ports 1-9
: 32768
: STP compatible
: 3
command
displays
the
109
switch's
Advertisement
Table of Contents
