D-Link DES-3350SR Command Line Interface Reference Manual page 167

DES-3350SR Layer 3 Fast Ethernet Switch User's Guide
Command Parameters
show {group_id <group_id 1-6>|
link_aggregation algorithm}
show lacp_port <portlist>
Each command is listed, in detail, in the following sections.
create link_aggregation group_id
Purpose Used to create a link aggregation group on
the switch.
Syntax create
<group_id 1-6> {type [lacp|static]}
Description This
aggregation group.
Parameters <group_id 1-6> − Specifies the group id.
The switch allows up to six link aggregation
groups to be configured. The group number
identifies each of the groups.
type [lacp|static] − Specifies the type of
group ID.
Restrictions Only administrator-level users can issue
this command.
Example Usage:
To create a link aggregation group:
link_aggregation
command will create
167
group_id
a link