Table of Contents
Advertisement
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide
Example Usage:
To configure the 802.1x port-based authentication mode
for ports 5-6:
local>config 802.1x auth_mode port_based ports 5-6
Command: config 802.1x auth_mode port_based ports 5-6
Success.
local>
config radius add
Purpose
Used to configure the settings the switch
will use to communicate with a Radius
server.
Syntax
config radius add <server_index 1-3>
<server_ip>
[default|{auth_port <udp_port_number>|
acct_port <udp_port_number>}]
Description
The config radius add command is used to
configure the settings the switch will use to
communicate with a Radius server.
<server_index 1-3> − Assigns a number to
Parameters
the current set of Radius server settings.
Up to three groups of Radius server
settings can be entered on the switch.
<server_ip> − The IP address of the Radius
server.
key − Specifies that a password and
encryption key will be used between the
switch and the Radius server.
key
<passwd
246
32>
Advertisement
Table of Contents
