DES-3350SR Layer 3 Fast Ethernet Switch User's Guide
PIM C
The PIM commands in the Command Line Interface (CLI) are
listed (along with the appropriate parameters) in the following
table.
Command
Parameters
config pim
ipif <ipif_name 12>
all
hello <sec 1-18724>
jp_interval <sec 1-18724>
state [enabled/disabled]
enable pim
disable pim
show pim
ipif <ipif_name 12>
neighbor
ipaddress <ipaddr>
show pim
ipif <ipif_name 12>
Each command is listed, in detail, in the following sections.
28
OMMANDS
303