DES-3250TG Layer 2 Fast Ethernet Switch User's Guide
represent the IP address to be assigned to the IP
interface named System and the y's represent the
corresponding subnet mask.
2. Alternatively, you can enter config ipif System
ipaddress
xxx.xxx.xxx.xxx/z.
represent the IP address to be assigned to the IP
interface named System and the z represents the
corresponding number of subnets in CIDR notation.
The IP interface named System on the switch can be assigned
an IP address and subnet mask which can then be used to
connect a management station to the switch's Telnet or Web-
based management agent.
Figure 1-3. Assigning the Switch an IP Address
In the above example, the switch was assigned an IP address of
10.24.22.5 with a subnet mask of 255.0.0.0. The system
message Success indicates that the command was executed
successfully. The switch can now be configured and managed
Where
the
14
x's