DES-3250TG Layer 2 Fast Ethernet Switch User's Guide
local>disable clipaging
Command: disable clipaging
Success.
local>
enable telnet
Purpose
Used to enable communication with and
management of the switch using the Telnet
protocol.
Syntax
enable telnet <tcp_port_number>
Description
This command is used to enable the Telnet
protocol on the switch. The user can
specify the TCP or UDP port number the
switch will use to listen for Telnet requests.
Parameters
<tcp_port_number>
number. TCP ports are numbered between
1 and 65535. The "well-known" TCP port
for the Telnet protocol is 23.
Restrictions
Only administrator-level users can issue
this command.
Example Usage:
To enable Telnet and configure port number:
local>enable telnet 23
Command: enable telnet 23
−
The
TCP
41
port