D-Link DES-3250TG Reference Manual page 74

DES-3250TG Layer 2 Fast Ethernet Switch User's Guide
ping
<sec>}
Description This command sends Internet Control
Message Protocol (ICMP) echo messages to
a remote IP address. The remote IP address
will then "echo" or return the message.
This
between the switch and the remote device.
Parameters <ipaddr> − The IP address of the remote
device.
times <value> − The number of individual
ICMP echo messages to be sent. A value of
0 will send an infinite ICMP echo messages.
The maximum value is 255. The default is
0.
timeout <sec> − Defines the time-out period
while waiting for a response from the
remote device. A value of 1 to 99 seconds
can be specified. The default is 1 second.
Restrictions Only administrator-level users can issue
this command.
Example Usage:
To send ICMP echo message to "10.48.74.121" for 4
times:
local>#ping 10.48.74.121 times 4
Command: ping 10.48.74.121
Reply from 10.48.74.121, time<10ms
Reply from 10.48.74.121, time<10ms
is used to confirm
74
connectivity