D-Link DES-3250TG Reference Manual page 46

DES-3250TG Layer 2 Fast Ethernet Switch User's Guide
Example Usage:
To restart the switch:
local>reboot
Command: reboot
Are you sure want to proceed with the
system reboot? (y/n)
Please wait, the switch is rebooting...
reset
Purpose Used to reset the switch to the factory
default settings.
Syntax reset {config/system}
Description This command is used to restore the
switch's
settings assigned from the factory.
Parameters config − If config is specified, all of the
factory default settings are restored on the
switch except for the IP address, user
accounts, and the switch history log.
system − If system is specified all of the
factory default settings are restored on the
switch.
If no parameter specified, the switch's
current IP address, user accounts, and
switch history log are retained.
parameters are restored to their factory
default settings.
configuration to the
46
default
All other