D-Link DES-3250TG Reference Manual page 160

DES-3250TG Layer 2 Fast Ethernet Switch User's Guide
config link_aggregation algorithm
Description This command configures to part of the packet
examined by the switch when selecting the
egress port for transmitting load-sharing data.
This feature is only available using the address-
based load-sharing algorithm.
Parameters mac_source − Indicates that the switch should
examine the MAC source address.
mac_destination − Indicates that the switch
should examin the MAC destination address.
mac_source_dest − Indicates that the switch
should
ddestination addresses
ip_source − Indicates that the switch should
examine the IP source address.
ip_destination − Indicates that the switch
should examine the IP destination address.
ip_source_dest − Indicates that the switch
should examine the IP source address and the
destination address.
Restrictions Only administrator-level users can issue this
command.
Example Usage:
To configure link aggregation algorithm for mac-source-
dest:
examine the MAC
160
source and