Introduction - D-Link DES-3250TG Reference Manual

DES-3250TG Layer 2 Fast Ethernet Switch User's Guide
The switch can be managed through the switch's serial port,
Telnet, or the Web-based management agent. The Command
Line Interface (CLI) can be used to configure and manage the
switch via the serial port or Telnet interfaces.
This manual provides a reference for all of the commands
contained in the CLI. Configuration and management of the
switch via the Web-based management agent is discussed in the
User's Guide.
Accessing the Switch via the Serial Port
The switch's serial port's default settings are as follows:
•
9600 baud
•
no parity
•
8 data bits
•
1 stop bit
A computer running a terminal emulation program capable of
emulating a VT-100/ANSI terminal and a serial port configured
as above is then connected to the switch's serial port via an RS-
232 DB-9 cable.
I
NTRODUCTION
11
1