D-Link DES-3250TG Reference Manual page 149

DES-3250TG Layer 2 Fast Ethernet Switch User's Guide
Example Usage:
To set the ingress checking status and the sending and
receiving GVRP information:
local>config gvrp 1-5 state enabled ingress_checking
enabled
Command: config gvrp 1-5 state enabled
ingress_checking enabled
Success.
enable gvrp
Purpose Used to enable GVRP on the switch.
enable gvrp
Syntax
Description This command, along with disable gvrp
below, is used to enable and disable GVRP
on the switch − without changing the GVRP
configuration on the switch.
Parameters none.
Restrictions Only administrator-level users can issue
this command.
Example Usage:
To enable the generic VLAN Registration Protocol (GVRP):
local>enable gvrp
Command: enable gvrp
149