D-Link DES-3250TG Reference Manual page 82

DES-3250TG Layer 2 Fast Ethernet Switch User's Guide
512-1023 15
1024-1518 0
Unicast RX 152
Multicast RX 557
Broadcast RX 3686
CTRL+C ESC q QUIT SPACE n
show error ports
Purpose Used to display the error statistics for a
range of ports.
show error ports <portlist>
Syntax
Description This command will display all of the packet
error statistics collected and logged by the
switch for a given port list.
Parameters <portlist> − Specifies a range of ports to
be configured. The port list is specified by
listing the beginning port number and the
highest port number of the range. The
beginning and end of the port list range are
separated by a dash. For example, 3 would
specify port 3. 4 specifies port 4. 3-4
specifies all of the ports between port 3 and
port 4 − in numerical order.
Restrictions none.
Example Usage:
To display the errors of port 3:
0 TX Frames 111
0
1
2
16
Next Page p Previous Page
82
2
r Refresh