D-Link DES-3250TG Reference Manual page 112

DES-3250TG Layer 2 Fast Ethernet Switch User's Guide
config traffic control
Syntax config traffic control [<storm_grouplist
1-8>/all]
[enabled/disabled]/multicast
[enabled/disabled]/dlf
[enabled/disabled]/threshold <value 0-
255>
Description This
broadcast storm control.
<storm_grouplist 1-8> − Used to specify a
Parameters
broadcast storm control group with the
syntax: module_id:group_id.
all − Specifies all broadcast storm control
groups on the switch.
broadcast [enabled/disabled] − Enables or
disables broadcast storm control.
multicast [enabled/disabled] − Enables or
disables multicast storm control.
dlf [enabled/disabled] − Enables or disables
dlf traffic control.
threshold <value 0-255> − The upper
threshold at which the specified traffic
control is switched on. The <value 0-255>
is the number of broadcast/multicast/dlf
packets, in Kbps, received by the switch
that will trigger the storm traffic control
measures.
Restrictions Only administrator-level users can issue
this command
command is used to
112
broadcast
configure