DES-3250TG Layer 2 Fast Ethernet Switch User's Guide
show packet ports
sent and received by the switch.
Syntax
show packet ports <portlist>
Description
This command is used to display statistics
about packets sent and received by ports
specified in the port list.
Parameters
<portlist> − Specifies a range of ports to be
configured. The port list is specified by
listing the beginning port number and the
highest port number of the range. The
beginning and end of the port list range are
separated by a dash. For example, 3 would
specify port 3. 4 specifies port 4. 3-4
specifies all of the ports between port 3 and
port 4 − in numerical order.
Restrictions
none.
Example Usage:
To display the packets analysis for port 7:
local>show packet ports 7
Port number : 7
Frame Size
Frame Counts Frames/sec
Total/sec
------------
------------
----------
64
3275
65-127
755
128-255
316
256-511
145
Frame Type
----------
-------
10
RX Bytes
408973
10
RX Frames
4395
1
0
TX Bytes
7918
81
Total
---------
1657
19
178