D-Link DES-3250TG Reference Manual page 60

DES-3250TG Layer 2 Fast Ethernet Switch User's Guide
config snmp community
default read write community string is
private.
Restrictions Only administrator-level users can issue
this command.
Example Usage:
To configure an SNMP community "System":
local>config snmp community System readwrite
Command: config snmp community System readwrite
Success.
Local>
config snmp trap_receiver
Purpose Used to configure an SNMP trap receiver.
Syntax config snmp trap_receiver <ipaddr>
<community_string>
Description This command is used to configure an
SNMP trap receiver on the switch that will
be
stations that want to access the switch
using SNMP management software.
Parameters
<ipaddr>
management
specified to receive traps from the switch's
SNMP agent. This management station will
used to authenticate
−
The IP address
station that
60
management
of the
is currently