D-Link DES-3250TG Reference Manual page 170

DES-3250TG Layer 2 Fast Ethernet Switch User's Guide
config igmp_snooping querier
Purpose Used to configure the time in seconds
between general query transmissions, the
maximum time in seconds to wait for
reports
packet
snooping.
Syntax config igmp_snooping querier
[<vlan_name 32>/all] {query_interval
<sec 1-65535>/max_response_time <sec
1-25>/robustness_variable <value 1-
255>/last_member_query_interval <sec
1-65535>/state [enabled/disabled]
Description This command configures IGMP snooping
querier.
Parameters <vlan_name 32> − The name of the VLAN
for which IGMP snooping querier is to be
configured.
query_interval <sec 1-65535> − Specifies
the amount of time in seconds between
general query transmissions. The default
setting is 125 seconds.
max_response_time <sec 1-25> − Specifies
the maximum time in seconds to wait for
reports from members. The default setting
is 10 seconds.
robustness_variable
Provides fine-tuning to allow for expected
packet loss on a subnet. The value of the
from members, the
loss that guarantees
<value 1-255>
170
permitted
IGMP
−