D-Link DES-3250TG Reference Manual page 100

Layer 2 switch command line interface reference manual
Hide thumbs Also See for DES-3250TG:
Table of Contents

Advertisement

DES-3250TG Layer 2 Fast Ethernet Switch User's Guide
config multicast_fdb
added to the forwarding table.
[add/delete] − Add will add the MAC
address to the forwarding table, delete will
remove
forwarding table.
[egress/forbidden] − Egress specifies the
port as being a source of multicast packets
originating from the MAC address specified
above, forbidden specifies the port as not
being a member of the VLAN and that the
port is forbidden from becoming a member
of the VLAN dynamically.
<portlist> − Specifies a range of ports to be
configured. The port list is specified by
listing the beginning port number and the
highest port number of the range. The
beginning and end of the port list range are
separated by a dash. For example, 3 would
specify port 3. 4 specifies port 4. 3-4
specifies all of the ports between port 3 and
port 4 − in numerical order.
Restrictions
Only administrator-level users can issue
this command.
Example Usage:
To add multicast MAC forwarding:
local>config multicast_fdb default 01-00-5E-00-00-00 add 1-5
Command: config multicast_fdb default 01-00-5E-00-00-00 add 1-
the
MAC
address
from
100
the

Advertisement

Table of Contents
loading

This manual is also suitable for:

Des-3250g

Table of Contents