D-Link DES-3250TG Reference Manual page 127

DES-3250TG Layer 2 Fast Ethernet Switch User's Guide
config traffic_segmentation
Parameters <portlist> − Specifies a range of ports that
will be configured for traffic segmentation.
The port list is specified by listing the
beginning port number and the highest port
number of the range. The beginning and end
of the port list range are separated by a
dash. For example, 3 would specify port 3. 4
specifies port 4. 3-4 specifies all of the ports
between port 3 and port 4 − in numerical
order.
forward_list − Specifies a range of ports that
will receive forwarded frames from the ports
specified in the portlist above.
null − Specifies that packets cannot be
forwarded to any ports.
<portlist> − Specifies a range of ports that
will be configured for traffic segmentation.
The port list is specified by listing the
beginning port number and the highest port
number of the range. The beginning and end
of the port list range are separated by a
dash. For example, 3 would specify port 3. 4
specifies port 4. 3-4 specifies all of the ports
between port 3 and port 4 − in numerical
order.
Restrictions Only administrator-level users can issue
this command.
Example Usage:
127