DES-3250TG Layer 2 Fast Ethernet Switch User's Guide
config snmp system_contact
Parameters
<sw_contact>
characters used to identify a contact
person who is responsible for the switch.
Restrictions
Only administrator-level users can issue
this command.
Example Usage:
To configure the switch contact to "ctsnow":
.
local>config snmp system_contact ctsnow
Command: config snmp system_contact ctsnow
Success.
local>
enable rmon
Purpose
Used to enable RMON on the switch.
enable rmon
Syntax
Description
This command is used, in conjunction with
the disable RMON command below, to
enable and disable remote monitoring
(RMON) on the switch.
−
A
maximum
64
of
128