D-Link DES-3250TG Reference Manual page 113

DES-3250TG Layer 2 Fast Ethernet Switch User's Guide
config traffic control
this command.
Example Usage:
To configure traffic control and state:
local>config traffic control 1-3,1-2 broadcast enabled
Command: config traffic control 1-3 broadcast enabled
Success.
local>
show traffic control
Purpose Used to display current traffic control
settings.
show traffic control <storm_grouplist 1-
Syntax
8>
Description This command displays the current storm
traffic control configuration on the switch.
group_list <storm_grouplist 1-8> − Used to
Parameters
specify a broadcast storm control group
with the syntax: module_id:group_id.
Restrictions none.
Example Usage:
113