D-Link DES-3250TG Reference Manual page 168

DES-3250TG Layer 2 Fast Ethernet Switch User's Guide
Command Parameters
show igmp vlan <vlan_name 32>
snooping group
show router ports vlan <vlan_name 32>
static
dynamic
Each command is listed, in detail, in the following sections.
config igmp_snooping
Purpose Used to configure IGMP snooping on the
switch.
config igmp_snooping [<vlan_name
Syntax
32>/all] {host_timeout <sec 1-
16711450>/router_timeout <sec 1-
16711450>/leave_timer <sec 1-
16711450>/state [enabled/disabled]}
Description This command allows you to configure
IGMP snooping on the switch.
Parameters <vlan_name 32> − The name of the VLAN
for
configured.
host_timeout <sec 1-16711450> − Specifies
the maximum amount of time a host can
be a member of a multicast group without
the switch receiving a host membership
report. The default is 260 seconds.
which IGMP snooping
168
is to be