D-Link DES-3250TG Reference Manual page 128

DES-3250TG Layer 2 Fast Ethernet Switch User's Guide
To configure ports 1 through 10 to be able to forward
frames to port 11 through 15:
local> config traffic_segmentation 1-10 forward_list 11-15
Command: config traffic_segmentation 1-10 forward_list 11-15
Success.
local>
show traffic_segmentation
Purpose Used
segmentation configuration on the switch.
Syntax show traffic_segmentation <portlist>
Description The show traffic_segmentation command is
used
segmentation configuration on the switch.
<portlist> − Specifies a range of ports for
Parameters
which
configuration
displayed. The port list is specified by listing
the beginning port number and the highest
port number of the range. The beginning
and end of the port list range are separated
by a dash. For example, 3 would specify
port 3. 4 specifies port 4. 3-4 specifies all of
the ports between port 3 and port 4 − in
numerical order.
Restrictions None.
to display the current
to display the current
the current traffic
on the switch
128
traffic
traffic
segmentation
will be