D-Link DES-3250TG Reference Manual page 132

DES-3250TG Layer 2 Fast Ethernet Switch User's Guide
show bandwidth_control
configuration on the switch, on a port-by-
port basis.
Parameters <portlist> − Specifies a range of ports to be
configured. The port list is specified by
listing the beginning port number and the
highest port number of the range. The
beginning and end of the port list range are
separated by a dash. For example, 3 would
specify port 3. 4 specifies port 4. 3-4
specifies all of the ports between port 3 and
port 4 − in numerical order.
Restrictions None.
Example Usage:
To show bandwidth control for ports 1 through 11:
local>show bandwidth_control 1-11
Command: show bandwidth_control 1-11
Bandwidth Control Table
Port RX Rate (Mbit/sec)
---- ------------------------
1 no_limit
2 no_limit
3 no_limit
4 no_limit
5 no_limit
6 no_limit
7 no_limit
8 no_limit
9 no_limit
TX_RATE (Mbit/sec)
----------------------
10
10
10
10
10
10
10
10
10
132