D-Link DES-3250TG Reference Manual page 137

DES-3250TG Layer 2 Fast Ethernet Switch User's Guide
config mirror delete
<portlist> − This specifies a range of ports
that will be mirrored. That is, a range of
ports for which all traffic will be copied and
sent to the Target port.
rx − Allows the mirroring of only packets
received (flowing into) the port or ports in
the port list.
tx − Allows the mirroring of only packets
sent (flowing out of) the port or ports in the
port list.
both − Mirrors all the packets received or
sent by the port or ports in the port list.
Restrictions Only administrator-level users can issue
this command.
Example Usage:
To delete the mirroring ports:
local>config mirror 5 delete source 1-5 both
Command: config mirror 5 delete source 1-5 both
Success.
local>
enable mirror
Purpose Used to enable a previously entered port
mirroring configuration
137