D-Link DES-3250TG Reference Manual page 91

DES-3250TG Layer 2 Fast Ethernet Switch User's Guide
config stp
highest priority becomes the root device.
The lower the numerical value, the higher
the priority. The default is 32,768.
fbpdu [enabled/disabled]
forwarding of STP BPDU packets from
other network devices when STP is disabled
on the switch. The default is enabled.
Restrictions Only administrator-level users can issue
this command.
Example Usage:
To set maxage to 18 and hellotime to 4:
local>config stp maxage 18 hellotime 4
Command: config stp maxage 18 hellotime 4
Success.
local>
enable stp
Purpose Used to globally enable STP on the switch.
Syntax enable stp
Description This command allows the Spanning Tree
Protocol to be globally enabled on the
switch.
− Allows the
91