D-Link DES-3250TG Reference Manual page 161

DES-3250TG Layer 2 Fast Ethernet Switch User's Guide
local>config link_aggregation algorithm
mac_source_dest
Command: config link_aggregation algorithm
mac_source_dest
Success.
local>
show link_aggregation
Purpose Used
aggregation configuration on the switch.
Syntax show link_aggregation {group_id
<value>/algorithm}
Description This command will display the current link
aggregation configuration of the switch.
Parameters <value> − Specifies the group id. The
switch allows up to 6 link aggregation
groups to be configured. The group number
identifies each of the groups.
algorithm − Allows you to specify the
display of link aggregation by the algorithm
in use by that group.
Restrictions none.
Example Usage:
local>show link_aggregation
Command: show link_aggregation
to display the current
161
link