The figure below shows an example of a small office connected to
the Internet via a Single User Account using a DI-106 or DI-106M.
Note that if you enable the Single User Account feature, your local
IP address MUST be selected from the list of IP addresses for
private networks as defined by the IANA.
Configuration for Single User Account
The steps for configuring your DI-106 or DI-106M for Single User
Internet Access are identical to conventional Internet Access, with
the exception that you need to fill in three extra fields.
Follow steps 1-4 from the previous section, Internet Access
Configuration.
1. Single User Account—Enter Yes to enable the Single User
Account feature. Use the space bar to toggle between Yes and
No.
54
Configuring for Internet Access