Table of Contents
Advertisement
DI-1162 Remote Access Router
192.168.0.1
should be added to the client file. The Client Name field in the file
gives the IP address of the DI-1162, and the Key field should be the
same as the Key field in the Radius Configuration submenu.
After a RADIUS server has been configured, the DI-1162 will use it to
authenticate all users instead of checking it's internal Dial-Up User
Profile.
Adding Users to the RADIUS Database
The DI-1162 only uses the RADIUS database for user authentication;
except for Password and User Name. Most standard RADIUS
attribute fields are ignored by the DI-1162.
To add a user to the RADIUS database, edit the users file in the
RADIUS server's /etc/raddb directory, and add a line similar to
the following:
joeuser
Each user should have a user name/password record in the users
database. It is also possible to configure an IP address for each user by
adding a line in the Users database similar to the following:
Ip user
Password = "iusespecificip",
Framed_IP_Address = 192.168.0.117
Using RADIUS Authentication
1234
Password = "joepassword"
133
Advertisement
Table of Contents
