selections. This data will now be displayed in menu 21.1, Filter
Rules Summary.
Novell IPX Filter Rule
This section will show you how to configure the protocol-
dependent parameters for an IPX filter. The fields in the menu are
displayed in bold type.
1. IPX Packet Type—Enter the IPX packet type value of the
packet you wish to filter. This setting should be a one-byte
value, expressed in hexadecimal..
2. Destination/Source Network #—Enter the four hex-byte
destination/source network numbers of the packet that you wish
to filter.
3. Destination/Source Node #—Enter in the six hex-byte value
for the destination/source node number of the packet you wish
to filter.
114
Filter Configuration