Firewall; Outbound Filter - D-Link DWM-312 User Manual

Section 4 - Con guration
Outbound Filter enables you to control what packets are allowed to be sent out to the Internet. The outbound lter applies to all outbound packets.
Select this box to enable outbound ltering.

Outbound Filter:

Select a schedule to use and copy to the speci ed rule ID when
Use Schedule Rule:
you click the Copy to button. You may select Always On or use
a speci c schedule that you have de ned. To create and edit
schedules, please refer to Schedules on page 40.
OUTBOUND FILTER RULES LIST
Here, you can select whether to Allow or Deny all outgoing tra c
except for tra c that matches the listed rules.
This identi es the rule.
ID:
Specify the local IP address and then specify the port after the
Source IP : Ports:
colon.
Specify the remote IP address and then the port after the colon.
Destination IP :
Ports:
Check the box to enable the speci ed rule.
Enable:
Specify the schedule rule number. Click on the Add New Rule
Schedule Rule #:
button to create a new schedule rule.
Click to go back to the previous lter page.
Previous Page:
Click to advance to the next lter page.
Next Page:
Click Apply to save your settings, or Refresh to revert to your
previous settings.
D-Link DWM-312 User Manual

Firewall

Outbound Filter
40