EXFO MaxTester 635G User Manual page 260

Frequency Tests
RX Tone with FED
To select the parameter values:
1. Press the up/down arrow keys to highlight the desired parameter.
2. Press the left/right arrow keys to view and select the options.
OR
3. Press
keys to scroll through.
4. Press
Multiple Tone Graph Result Details
The Result Details read-only page displays the RX
VF/WB Loss and Frequency results in graphical format
for the Multiple RX Tone with FED test.
Test Group is the overall test group of the

selected saved results file, for example
Frequency Tests.
Test Identification is the test type of the group, for

example RX Tone with FED.
Test Modes is the mode of test, for example

Multiple Tone.
Select Graph button changes to Graph Selected when pressed and

opens a new selection of function keys which allow you to maneuver
the graph as follows:

250
on a value to open a list box of options and use the navigation
to confirm the value.
Cursor - press the left/right arrow keys to decrease/increase the
values by moving the cursor. Press and hold the left/right arrow
keys to accelerate the cursor. Press
place it in the middle of the current x-axis limits.
to recall the cursor and
MAX-635G