EXFO MaxTester 635G User Manual page 197

Landscape Mode function key allows you to view the test results in

landscape mode. Whether the keyboard is on the right or left is
dependent on your preferred Landscape Mode Settings configured in
Setup/Application Settings/General.
This mode generates the following function keys:



To select the parameter values in Landscape Mode:
1. Press the Parameters function key.
2. Press the up/down arrow keys to highlight the desired parameter.
3. Press the left/right arrow keys to view and select the options.
4. Press
Copper and G.fast/VDSL2/ADSL2+ Multi-play Test Set
Portrait Mode is used to change the screen orientation from
landscape to portrait.
Select Graph opens a new selection of function keys which allow
you to maneuver the graph. (Same as above.)
Parameters displays a small strip window when selected allowing
you to change the Bandwidth, Noise Filter, Termination, and
Termination Resistance values from a list of options.
to confirm the value.
Noise Tests
WB PSD Noise
187